VAE CONTROLS - Telemetry & SCADA Water Network Monitoring Systems

CFI Inverter

The CFI Inverter has been designed to invert impulse signals to 4 to 20mA current signals. The inverter may be typically used in switching impulse output from a flow scanner or a rotation sensor . The purpose for which the CFI 1 inverter is used lies in the possibility to use standard input circuits of telemetric stations or programmable automatic devices, which allow for the processing of current rather than impulse signals.

CS - (348 kB)   /   9.7.2004

DHI ODULA - Modelling of Water Supply Networks

The SCX SCADA dispatching system allows for an exchange of technological data with other information systems, such as graphical, commercial, managerial, modeling and other systems.

CS - (299 kB)   /   13.8.2003

ELBJ-1 Arrester

ELBJ-1 Arrester has been designed for RF overvoltage protection of radio station antenna terminals. The typical application involves radio networks for telemetric transmissions in water supply engineering, gas supply engineering, power industry and elsewhere.

CS - (536 kB)   /   9.7.2004

micro MGX telemetric station

The micro MGX telemetric station marks a significant advance in the domain of telemetric stations (RTU), designed for the applications which involve limited or inaccessible supply. The station is delivered in a standard modification (see the Photo), which may be completed with communication and supply facilities for the given application, or as a finished station in a box including a PSTN/GSM modem and supply alkaline cells

CS - (510 kB)   /   9.7.2004

ODBC - Data Server

ODBC - DataServer is a controller for the access to the C-BASE database of the SCX SCADA dispatching system. A typical example of its use involves working with the database directly via Microsoft Excel.

CS - (251 kB)   /   13.8.2003

SCX 6 - SCADA System - Water network monitoring system

SCX 6 - SCADA System - SCX supports flexible architecture for various systems ranging from several hundreds to hundreds of thousands of data points. SCX is based on standard industrial interfaces and protocols - OPC, OLE/DB, ODBC, HTTP, XML, IEC61131, IEC60870, DNP3, Modbus, Modbus/TCP. This makes it into a global open SCADA system.

CS - (300 kB)   /   9.7.2004

SCX Explorer - Internet Application

SCX Explorer is an Internet-based application which allows for an access to some of the SCX SCADA system services via Internet Explorer browser.

CS - (785 kB)   /   13.8.2003

SIS1x24 Identification System - Card reader

Contact-free access identification system featuring a DeviceNet interface for direct linkage with the telemetric station. The application of the system is primarily in the field of security guard, alerting entries into the site and providing personal identification by means of radio indication of personal codes and their transfer to and display at central dispatching centre. The system presents a complex set of technical and software tools for a single location with the possibility of code reading in explosion risk involving atmospheres.

CS - (1080 kB)   /   9.7.2004
EN - (1147 kB)   /   26.1.2005
BG - (1182 kB)   /   25.1.2005

TSLC 422 Station

The facility is a small telemetric station designed for the simplest monitoring and controlling applications. In predefined intervals or once the limit/alarm value has been achieved, it transmits information on the state of inputs/outputs. Once the alarm/limit values are exceeded, the given action is executed: contact switching/breaking of the input, alarm report transmission.

CS - (618 kB)   /   9.7.2004
EN - (412 kB)   /   14.12.2006

TSX24 telemetric station

TSX24 telemetric station is a low consumption compact telemetric station designed for monitoring and remote control of technological facilities.

CS - (1822 kB)   /   9.7.2004
PL - (443 kB)   /   8.12.2005
SRB - (740 kB)   /   11.1.2006
SP - (1244 kB)   /   30.10.2006

VCL X24 D02 Inverter

The VCL X24 D02 Inverter relay adapter has been designed to be integrated within the PX24 telemetric station, and it allows for the DO 1 and DO 2 transistor outputs of the telemetric station to be applied in switching two relay outputs.

VCL01M Source

VCL01M is an intelligent supply and standby source, whose parameters may be set by a computer.

CS - (1421 kB)   /   9.7.2004

VCLX24C Communication Module

The VCLX24C01 Communication Module is used as an inverter of Serck data protocol for the transfer and retranslation of messages via a radio network.

CS - (789 kB)   /   9.7.2004

Waste Water Treatment Plant

VAE CONTROLS designs, delivers and installs computer-assisted management systems of water treatment plants and sewage systems. The scope of our works includes a proportion of projects and deliveries of heavy current, MaR (Measurement and Regulation) and computer-assisted management systems.

CS - (139 kB)   /   7.9.2004